BSR UA14 Turntable Mat

If you fit the mat directly to the platter you will notice that it may look out of shape. By following the directions listed below this will help the mat to be fitted easily and correctly:

• Remove the c-clip from the platter and lift the platter off completely.
• Drop a couple of spots of washing up liquid directly to the top of the platter and spread around with your fingers including the fixing holes.
• Push 2 studs through 2 holes at 12 o’clock and 2 studs through at 6 o’clock positions. This should leave 1 stud left at 9 o’clock and 1 stud at 3 o’clock.
• Ensure the studs are pushed through completely.
• Shake the platter so the mat finds its correct position.
• Push the final 2 studs through the fixing holes.
• Place a finger under the outer mat and run it all the way around and then do the same on the inner side of the mat.
• This should help it find its correct position on the platter.